Thrust washer question...

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Thrust washer question... [Re: hellbound] #807972 04/27/07 02:22 AM

Joined: Sep 2003

Posts: 1,214

JLEMOND

Body Damage is Cool

YES THEY MUST BE THE OTHER WAY OR YOU WILL BURN THEM OUT , AS YOU PUSH THE CLUTCH IN A FORCE THE CRANK SHAFT FORWARD THERE WILL BE LITTLE TO NO OIL ON THE SURFACE OF THE BEARING AND PRETTY SOON, YOU HAVE NO BEARING AND OR THE THRUST FACE OF THE CRANK GETS WORN DOWN, AND THAT ISNT A CHEAP FIX, AS MICHAEL SAID THE GROOVES MUST FACE THE CRANK JOURNAL FACE , JERRY

Entire Thread
Subject	Posted By	Posted
Thrust washer question...	hellbound	04/25/07 08:40 AM
Re: Thrust washer question...	mlclark	04/25/07 07:40 PM
Re: Thrust washer question...	hellbound	04/26/07 10:44 AM
Re: Thrust washer question...	JLEMOND	04/27/07 02:22 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.466s Queries: 16 (3.464s) Memory: 0.5973 MB (Peak: 0.6303 MB) Data Comp: Off Server Time: 2026-06-04 03:15:53 UTC
Valid HTML 5 and Valid CSS