|
|
|
|
 Brake lIne intermixing
#807984
04/25/07 05:16 PM
|
Joined: Aug 2005
Posts: 118
OP
Wheeler
|
05 Rubi/Unl
I'm putting a 4" lift SA on my rig. Brake lines have to be extended because I don't want them being my limiting straps if you know what I mean. I will not ghetto it by bending my hardlines so I can relocate the mount lower down the frame rail. I don't want to buy some high end braided brake line extensions at the tune of $300.00 or close to. I heard that YJ lines will merry up with TJ lines. True??????? If so is there any other issues that I need to know such as only "X" year YJ lines will work, etc.
Any info will be hugely appreciated. I have 17 days left before Moab and I'm apprehensive about starting this prior to mostly due to this issue. Thanks, much obliged.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 9.000s Queries: 15 (8.997s) Memory: 0.5945 MB (Peak: 0.6275 MB) Data Comp: Off Server Time: 2026-10-23 02:14:04 UTCValid HTML 5 and Valid CSS 
