OK I couldn't find some small jumper wires to use, but when I unplugged the 6 wire connector I was reading 12v on 3 of the connectors. I wasn't sure which points to put 12v too to try and run the motor. It looks like this:

|--------|
|[] [+] []|
|--------|
| [+] [+] |
|--------|

So one of the corners doesn't have an actual connector on it. The "+" is where i got 12v when i tested it. I did it quick so don't take my word as gospel.

Last edited by Nick Muzzio; 05/04/07 12:41 AM.