Checking an oil pressure sending unit

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Checking an oil pressure sending unit [Re: Whizkidder] #808614 05/02/07 01:18 PM

Joined: Dec 2006

Posts: 44

So Central Texas

eppoh

Getting the Wheeling Fever

Aftermarket OP senders are a PIA on these trucks, in my experience. Just bite the bullet and buy one from Toyota- they fit and work.

Try one of the suggested retailers on this forum. Their prices are pretty good.

In any case- you aren't going to see good pressure- regardless of the sender.

Last edited by eppoh; 05/02/07 01:18 PM.

Entire Thread
Subject	Posted By	Posted
Checking an oil pressure sending unit	ttreat	04/28/07 03:20 PM
Re: Checking an oil pressure sending unit	Whizkidder	04/29/07 05:28 AM
Re: Checking an oil pressure sending unit	eppoh	05/02/07 01:18 PM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.539s Queries: 16 (3.537s) Memory: 0.5973 MB (Peak: 0.6303 MB) Data Comp: Off Server Time: 2026-06-01 14:53:14 UTC
Valid HTML 5 and Valid CSS