Help with Rancho install

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Help with Rancho install #808658 04/29/07 12:37 AM

Joined: Jan 2006

Posts: 11

Gandalf

Need a Spot

Can anyone offer some suggestions for installing Rancho front shocks? I'm installing a set of 99136 after my last two sets of standard length shocks died, but the bushing seems a little too big for the bottom mount and I can't seem to get it in, even without a sleeve.

Thanks!

Entire Thread
Subject	Posted By	Posted
Help with Rancho install	Gandalf	04/29/07 12:37 AM
Re: Help with Rancho install	Richard Saylor	04/29/07 02:08 AM
Re: Help with Rancho install	Gandalf	04/29/07 02:12 AM
Re: Help with Rancho install	TrailMystic	04/29/07 02:18 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.476s Queries: 15 (3.474s) Memory: 0.5985 MB (Peak: 0.6315 MB) Data Comp: Off Server Time: 2026-05-30 04:31:35 UTC
Valid HTML 5 and Valid CSS