Phew finally completed install of factory front and rear 4.88 diffs. Front diff was PITA to install, there had to be a better way to install it other than the way i did. My biggest problem was making enough room for the 6 bolts of the cv axles to line up with the side gears, Haynes manual makes it sound so simple 'just take these bolts out to remove and install is reverse'...yeah right! Is there a trick to this install? I ended up pulling one of the steering knuckles off and then pulling the cv axle out to make room for the bolts to slide into the cv axle, made me want to throw up <img src="/forums/images/graemlins/barf.gif" alt="" />. Its all done now though, but just incase i have to do it again i would really like to know an easier way.
Thanks for the all the help, 4x4wire.com rocks! <img src="/forums/images/graemlins/cheers.gif" alt="" />