Very Rough Idle / Basically No Runability

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Very Rough Idle / Basically No Runability [Re: B18VtecEg] #808774 04/30/07 09:39 AM

Joined: Dec 2006

Posts: 138

Perth, Western Australia

rustylux

Wheeler

I'm just throwing this out there but I'm pretty sure you have to jump some wires on the Computer to set the timing (i don't have a V6 so only repeating what I've read).

Maybe you overlooked this?

You can also get a readout of engine error codes I believe by jumping some wires as well. Maybe some of the other guys can chime in with details.

Entire Thread
Subject	Posted By	Posted
Very Rough Idle / Basically No Runability	B18VtecEg	04/30/07 04:32 AM
Re: Very Rough Idle / Basically No Runability	Davepet	04/30/07 07:41 AM
Re: Very Rough Idle / Basically No Runability	B18VtecEg	04/30/07 04:56 PM
Re: Very Rough Idle / Basically No Runability	rustylux	04/30/07 09:39 AM
Re: Very Rough Idle / Basically No Runability	4Crawler	04/30/07 03:15 PM
Re: Very Rough Idle / Basically No Runability	B18VtecEg	04/30/07 04:46 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.581s Queries: 16 (3.579s) Memory: 0.6033 MB (Peak: 0.6363 MB) Data Comp: Off Server Time: 2026-06-20 21:51:04 UTC
Valid HTML 5 and Valid CSS