Eaton banjo rear housing w/ corp 14 conversion

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Eaton banjo rear housing w/ corp 14 conversion #809497 05/03/07 07:29 AM

Joined: May 2007

Posts: 4

Conifer, Co.

ski2xs

Need a Spot

I've got a stump jumpin' friend who's found a way to convert these using corp 14 components. It seems to be a good way to be able to use these diff housings which allow for a better clearance. If anyone is interested PM and I'll give you his email.

Entire Thread
Subject	Posted By	Posted
Eaton banjo rear housing w/ corp 14 conversion	ski2xs	05/03/07 07:29 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.494s Queries: 15 (3.492s) Memory: 0.5913 MB (Peak: 0.6242 MB) Data Comp: Off Server Time: 2026-06-07 18:51:13 UTC
Valid HTML 5 and Valid CSS