|
|
|
|
radiator
#809653
05/04/07 03:05 AM
|
Joined: Apr 2007
Posts: 76
OP
Getting the Wheeling Fever
|
1989 Toyota 4WD extcab pickup 22re 32's factory 4.88 diffs <img src="/forums/images/graemlins/smile.gif" alt="" /> The stock radiator finally went and had to purchase one. Bought a new one from Advance auto parts & it was a direct bolt on. There were 3 differences between the two. 1. Stock radiator drain was center bottom. New radiator drain was to the left bottom looking into the engine compartment. 2. Filler neck of new radiator was larger in diameter than stock and came with a larger radiator cap. 3. New radiator is thicker and has 3 rows where as stock radiator was slimmer and has 2 rows.
Im concerned about #3. Think it'll hurt anything? <img src="/forums/images/graemlins/confused.gif" alt="" /> Radiator was lifetime warranty. Thanks
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.492s Queries: 15 (3.489s) Memory: 0.5962 MB (Peak: 0.6292 MB) Data Comp: Off Server Time: 2026-06-04 05:46:31 UTCValid HTML 5 and Valid CSS