My '89 STD pickup came with a bench seat that I couldn't stand any longer. I had a couple of Subaru buckets to throw in the truck but I had to knock off a couple of the original mounts and fab up a couple new ones so the seats would bolt in.



Of course then I wanted an armrest and some kind of center console for storage so I went to town building one. Materials used were 1/2 plywood, some spray adhesive, a wool blend material for covering (like speaker box material), 1" high density foam and cotton batting to pad the armrest, black vinyl to cover the armrest, and some aluminum stock and diamond plate for trim. I'm really happy with how it came out.



You can see pics of the build from start to finish by clicking here.

I welded in a nut at the front, and drilled and tapped then welded a peice of 1/4" flat stock for the rear mounting holes. The 3 bolts hold the console to the floor very well.