Low Sulfur Diesel, need an additive?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Low Sulfur Diesel, need an additive? [Re: bellavesus] #810297 05/07/07 07:04 PM

Joined: Dec 2003

Posts: 354

Twin Cities

acy76

Mudrunner

Here in Minnesota, diesel is required to be a 2% biodiesel blend. Biodiesel is supposed to provide excellent lubricity, so you could always add some if you're worried. Or, even better, use B100.

I don't think there is much to worry about using ULSD as-is, though.

1988 Isuzu Trooper LS
2.8l Isuzu 4JB1-TC intercooled turbo diesel
www.dieseltrooper.blogspot.com

Entire Thread
Subject	Posted By	Posted
Low Sulfur Diesel, need an additive?	bellavesus	05/07/07 06:11 PM
Re: Low Sulfur Diesel, need an additive?	acy76	05/07/07 07:04 PM
Re: Low Sulfur Diesel, need an additive?	Dougal	05/08/07 07:18 AM
Re: Low Sulfur Diesel, need an additive?	88SuperTrooper	05/22/07 04:50 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.689s Queries: 16 (3.686s) Memory: 0.5990 MB (Peak: 0.6320 MB) Data Comp: Off Server Time: 2026-06-02 19:22:55 UTC
Valid HTML 5 and Valid CSS