trying to converting a two wheel drive tranny

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: trying to converting a two wheel drive tranny [Re: juks] #811120 10/08/07 12:30 AM

Joined: Aug 2003

Posts: 612

Bremond, TX

mechanic58 Offline

Rock Warrior

You will need to totally disassemble your SM465 and swap out the output shaft. An SM465 for a 4WD application will use a 10 spline output which is shorter than the 2wd shaft and will mate to a 10 spline input NP205 with the appropriate adapter. (These parts should all be available from a junkyard) You can NOT use your existing output shaft. Check ebay.

2007 Ford F150 Supercab

Entire Thread
Subject	Posted By	Posted
trying to converting a two wheel drive tranny	juks	05/10/07 10:35 PM
Re: trying to converting a two wheel drive tranny	mechanic58	10/08/07 12:30 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.508s Queries: 16 (3.506s) Memory: 0.5940 MB (Peak: 0.6270 MB) Data Comp: Off Server Time: 2026-06-10 00:15:56 UTC
Valid HTML 5 and Valid CSS