Post Dual Time Chain Conv. Noise Conclusion

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Post Dual Time Chain Conv. Noise Conclusion [Re: Martini] #811797 05/13/07 08:15 PM

Joined: Apr 2007

Posts: 76

Augusta, GA, USA

mqm

Getting the Wheeling Fever

So was the hidden bolt causing all the clattering, or do you think tightening the tensioner to spec did the trick?

Entire Thread
Subject	Posted By	Posted
Post Dual Time Chain Conv. Noise Conclusion	Martini	05/13/07 05:25 PM
Re: Post Dual Time Chain Conv. Noise Conclusion	MAC	05/13/07 06:02 PM
Re: Post Dual Time Chain Conv. Noise Conclusion	Martini	05/13/07 06:15 PM
Re: Post Dual Time Chain Conv. Noise Conclusion	mqm	05/13/07 08:15 PM
Re: Post Dual Time Chain Conv. Noise Conclusion	Martini	05/14/07 02:13 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.465s Queries: 16 (3.463s) Memory: 0.6004 MB (Peak: 0.6334 MB) Data Comp: Off Server Time: 2026-06-16 05:35:34 UTC
Valid HTML 5 and Valid CSS