Post Dual Time Chain Conv. Noise Conclusion

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Post Dual Time Chain Conv. Noise Conclusion [Re: mqm] #811798 05/14/07 02:13 PM

Joined: Mar 2005

Posts: 59

Atlanta, GA

Martini

Getting the Wheeling Fever

I'm thinking it's a combination of the bolt rub, repostioning of the guides, and retorquing the tensioner. Thanks everyone! Just for the record, the kit from LCEngineering was outstanding. A little pricey, but they do have quality stuff.

86' 4Runner, Manual 22RE, Grey SR5
05' 4Runner 4WD Sport, Silver

Entire Thread
Subject	Posted By	Posted
Post Dual Time Chain Conv. Noise Conclusion	Martini	05/13/07 05:25 PM
Re: Post Dual Time Chain Conv. Noise Conclusion	MAC	05/13/07 06:02 PM
Re: Post Dual Time Chain Conv. Noise Conclusion	Martini	05/13/07 06:15 PM
Re: Post Dual Time Chain Conv. Noise Conclusion	mqm	05/13/07 08:15 PM
Re: Post Dual Time Chain Conv. Noise Conclusion	Martini	05/14/07 02:13 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.524s Queries: 16 (3.522s) Memory: 0.6010 MB (Peak: 0.6340 MB) Data Comp: Off Server Time: 2026-06-16 02:11:04 UTC
Valid HTML 5 and Valid CSS