Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: Power steering pump output [Re: Bansil] #811955 05/16/07 12:47 PM
Joined: Feb 2004
Posts: 965
Starchild Offline OP
Rock Warrior
Quote
I found these spec's in the 94/95 Isuzu manual,for test procedures.

1,351->1,420 psi as normal for the pump.

not sure if it helps or not.


I found those same numbers in my shop manual once I finally looked <img src="/forums/images/graemlins/pfft.gif" alt="" />


"SERENITY NOW!"

1995 Passport - TH700R4 - Twin-sticked Dana300 w/tera 4:1 - Leaf sprung SAS w/Dana 60/14BFF - 38.5x11 Boggers - DOR bumper w/ MM SE9500
Re: Power steering pump output [Re: Starchild] #811956 05/16/07 05:39 PM
Joined: Apr 2003
Posts: 1,994
Bansil Offline
Body Damage is Cool
same specs for the 98+ R/P also.........





98 Rodeo(hers)
00 Rodeo(his)

Lisa's Rodeo
Page 2 of 2 1 2







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.008s Queries: 16 (0.005s) Memory: 0.5914 MB (Peak: 0.6559 MB) Data Comp: Off Server Time: 2026-06-06 01:23:33 UTC
Valid HTML 5 and Valid CSS