Aftermarket Oil Gauge Question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Aftermarket Oil Gauge Question #812436 05/17/07 02:37 AM

Joined: Oct 2006

Posts: 39

67shagster Offline

Getting the Wheeling Fever

I just installed a SunPro mechanical oil pressure gauge. Once the engine is warmed up, the pressure goes to zero at idle. When driving, the pressure is around 25-35 psi. Is this normal for a mechanical gauge?

Thanks in advance,

shagster

Entire Thread
Subject	Posted By	Posted
Aftermarket Oil Gauge Question	67shagster	05/17/07 02:37 AM
Re: Aftermarket Oil Gauge Question	OOP'S	05/17/07 03:36 AM
Re: Aftermarket Oil Gauge Question	dcg9381	05/17/07 03:56 AM
Re: Aftermarket Oil Gauge Question	67shagster	05/17/07 05:02 AM
Re: Aftermarket Oil Gauge Question	mcpree	05/17/07 05:18 AM
Re: Aftermarket Oil Gauge Question	OOP'S	05/17/07 06:14 AM
Re: Aftermarket Oil Gauge Question	foxtrapper	05/17/07 12:25 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.527s Queries: 15 (3.525s) Memory: 0.6044 MB (Peak: 0.6374 MB) Data Comp: Off Server Time: 2026-06-20 20:56:49 UTC
Valid HTML 5 and Valid CSS