Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: Getting more torque. (A thought) [Re: blitz] #812489 05/20/07 01:01 AM
Joined: Apr 2007
Posts: 165
O
oul053 Offline
Wheeler
extractors are just another name for a custom exhaust manifold, they just flow alot better than standard, with most cars if u put extractors, exhuast system and a decent airfilter u normally get a couple of kw at the wheels. have u tried the silly things u get from ebay which wire to ur afm and tell it that the air is really cold so it runs the engine richer?? just a thought, but i dunno if they work or not. there only a few $$


01 sporty, king springs,235/75/15s,tjm nudge bar,narva blue spotties,triffa spotties,uhf,dual battery sys and a sub.
Re: Getting more torque. (A thought) [Re: oul053] #812490 05/21/07 08:00 AM
Joined: Oct 2006
Posts: 48
Platarg814 Offline OP
Getting the Wheeling Fever
Quote
have u tried the silly things u get from ebay which wire to ur afm and tell it that the air is really cold so it runs the engine richer?? just a thought, but i dunno if they work or not. there only a few $$


If you look a bit, on Ebay, you'll find that they are a resistor which can literally be purchased for a few coins once you know the resistance value for the specific vehicle. Again, look and find that value on Ebay.

Re: Getting more torque. (A thought) [Re: Cen_Tex_KIA] #812491 05/21/07 08:06 AM
Joined: Oct 2006
Posts: 48
Platarg814 Offline OP
Getting the Wheeling Fever
Quote
in a horizontal config, it might even defeat by wasting vacume pressure "pulling" the mixture through the tube.........Solition, weld up a intake that puts the TB vertical and use ram air!..........oops, the Mopar in me is talking. <img src="/forums/images/graemlins/smile.gif" alt="" />


<non-offensive tone of voice>

The MoPar in you should be familiar with the early 60s Cross ram for the B engines. You know, the one that put 30 inches between the 2 four barrel carbs? Specifically designed to boost torque at 2800 RPM where the full size Chrysler 300 needed it the most. And by the way, if I'm welding up a new intake, it includes provisions for a Whipplecharger. <img src="/forums/images/graemlins/evil.gif" alt="" />

</non-offensive tone of voice>

Page 2 of 2 1 2

Moderated by  4x4Wire, Axe Man, DamKia 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.003s) Memory: 0.6018 MB (Peak: 0.6551 MB) Data Comp: Off Server Time: 2026-05-29 14:53:07 UTC
Valid HTML 5 and Valid CSS