Crap.

Just got a call from the inspector.

I changed out the front side lights to NA dot one's, just 'in case'.. but I plugged in the signal bulb and not the other one.

There's two leads/bulbs in the JDM version and only one in the NA version.

I have to go back there and either swap the entire side lights out back to JDM's or plug in the proper plug.

What I'm wondering is this..

Plug #1 - turn signal (flashing) only
Plug #2 - turn signal constant (parking light) only

or is it ...

Plug #1 - turn signal (flashing) only
Plug #2 - turn signal constant (parking light) AND flashing only

Right now I only have flashing lights and not parking lights. So either I need to change the connector to the parking light(constant on) one and hope that it flashes as well or just put back the JDM's.

Opinions before I head back out there ?

Luckily he'll let me swap 'em back.

I'll go there tmrw morning and swap them back in.