|
|
|
|
Lengthening stock E-Brake Cable
#813122
05/19/07 05:54 PM
|
Joined: Jun 2004
Posts: 615
OP
Rock Warrior
|
I did a SOA swap with some pretty flat 4-Runner springs. Hacked out the cross member and got a 1-Piece Drive shaft made. Only problem is the passenger e brake cable.
I lengthened the 'junction' block but am having trouble finding a spot to route the cable. I want to route it above the drive shaft. What kind of bracketry could I fab up? Anyone done this?
'90 Trooper - 2.6L 5-Speed - 1" BL - Custom Roof Rack+2x55watt ProComp - Herculined Interior - Pace Setter Header - Dynomax Super Turbo - K&N - ProComp ES3000 Shocks - Optima Red - MSD 6A - 31" Kumho Mudders - Black Rock Crawlers
|
|
|
Entire Thread
|
Lengthening stock E-Brake Cable
|
NotSoSimple
|
05/19/07 05:54 PM
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.468s Queries: 15 (3.466s) Memory: 0.5906 MB (Peak: 0.6236 MB) Data Comp: Off Server Time: 2026-05-30 13:32:29 UTCValid HTML 5 and Valid CSS