Cross thread MAF sensor assembly

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Cross thread MAF sensor assembly [Re: t28wilson] #813438 05/22/07 02:07 AM

Joined: Jan 2001

Posts: 11,595

Cincinnati, OH

Adam F

Forum Moderator

Are you saying you cross threaded the mounting bolts? If so, the best thing to do is to drill and tap the threads to a larger size and replace the bolts with the appropriate new size.

88 4R, 350 V8, R150 5 speed Sold <...uot; />
97 4R, stock, daily driver
98 Sienna, kid and dog hauler, wife's ride

Entire Thread
Subject	Posted By	Posted
Cross thread MAF sensor assembly	t28wilson	05/21/07 03:25 PM
Re: Cross thread MAF sensor assembly	Adam F	05/22/07 02:07 AM
Re: Cross thread MAF sensor assembly	t28wilson	05/22/07 02:39 PM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.499s Queries: 16 (3.496s) Memory: 0.5972 MB (Peak: 0.6302 MB) Data Comp: Off Server Time: 2026-06-06 13:42:28 UTC
Valid HTML 5 and Valid CSS