Quote
thanks guys. yup, yup & yup. Tabs bent in and out. 12 lb drag. outer nut is around 60ft lbs. This is so baffling...I can't think of anything else... <img src="/forums/images/graemlins/confused.gif" alt="" />


Are you sure the tab in the center of your star lock washer is long enough to positively grab the machined groove in the threads so it won't turn on the shaft? I have seen one that somehow walked it's way out of the groove and into the bottom of the threads... Good luck! <img src="/forums/images/graemlins/patriot.gif" alt="" />