4x4 problem

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 4x4 problem [Re: fugitive4x4] #814489 05/29/07 04:21 PM

Joined: Jan 2003

Posts: 270

jmoser

Mudrunner

I went with Warn hubs and could salvage the solenoids off my '96 SR5. Truck has 90K and solenoids were retired at 65K. How hard are they to remove? Maybe you can talk me into it.

Jeff
96 T100 SR5 4WD Ext Cab, Warn Hubs, HD torsion bars, Bilsteins, Camper Shell, TJM bar, factory 31 x 10.5's, Powertrax No-slip rear, Recaro driver's bucket

Entire Thread
Subject	Posted By	Posted
4x4 problem	fugitive4x4	05/25/07 11:05 PM
Re: 4x4 problem	eleet	05/26/07 12:18 AM
Re: 4x4 problem	fugitive4x4	05/27/07 01:36 PM
Re: 4x4 problem	eleet	05/27/07 03:04 PM
Re: 4x4 problem	foxtrapper	05/29/07 11:11 AM
Re: 4x4 problem	jmoser	05/29/07 04:21 PM
Re: 4x4 problem	ErikB	05/30/07 05:17 PM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.594s Queries: 16 (3.592s) Memory: 0.6047 MB (Peak: 0.6377 MB) Data Comp: Off Server Time: 2026-06-24 22:22:15 UTC
Valid HTML 5 and Valid CSS