Finished what i started last week with my quest to get more air into such a little hole!

Long story short, removed ALL stock airbox, filters tubing etc! from the MAF forwards. Clamped on a 6'x3' K&N cone filter. Built a air box using 14 guage stainless to act as a dust/heat shield, the box seals to the hood liner, cut a 2'x5' slot in the wheel arch to draw cool air from underneath and a 1 1/2'x4' slot in the hood and used a small vent cowl painted body colour to act as a rain deflector and to allow the filter to draw cool air in from the top

(If anyone is intrested the KIA body colour "Stone Beige" is a 99% match with GM's LT Brier Brown CDSGM331)

And now the pictures!