Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
K&N filter kit part number? #815209 05/29/07 01:30 PM
Joined: Mar 2005
Posts: 245
rodeoredd Offline OP
Wheeler
what K&N cone filter kit part number works with the 3.2 V6?

if not - what are you ghuys using for cone filters on the 3.2?

can;t find one anywhere but ebay


'99 Rodeo V6 4x4 w/ 8" lift, 33" TrXus MT
4.77, Aussie Locked rear, 8500lb winch, custom rack, custom winch bumper, ProComp lights, 230,000km
http://www.cardomain.com/ride/2231794
Re: K&N filter kit part number? [Re: rodeoredd] #815210 06/09/07 11:47 PM
Joined: Oct 2002
Posts: 2,285
CPOM Offline
Body Damage is Cool
partsamerica.com lists k+n filters with all dimensions if you know exactly what you need.


CHRIS
98 Amigo, 92 Pup

need a pickup 1st gen fuel level sender
Re: K&N filter kit part number? [Re: CPOM] #815211 06/10/07 06:44 AM
Joined: Mar 2005
Posts: 245
rodeoredd Offline OP
Wheeler
thanks anyway, but i found it, bought it, and am already enjoying it!


'99 Rodeo V6 4x4 w/ 8" lift, 33" TrXus MT
4.77, Aussie Locked rear, 8500lb winch, custom rack, custom winch bumper, ProComp lights, 230,000km
http://www.cardomain.com/ride/2231794
Re: K&N filter kit part number? [Re: rodeoredd] #815212 06/16/07 05:04 AM
Joined: Feb 2004
Posts: 26
A
Airborne6176 Offline
Getting the Wheeling Fever
There are two (2) open cone K&N air filters that I've seen and used thus far and my '02 RS. At first I had a Calmini cone filter w/ bracket. It got trashed in Yucca Valley, CA. Then I went with the K&Ns...

The first K&N I used is the most common filter (I think),# RU-1785. The K&N filter I'm using now is a bit larger (still fits with no mods) and is part # RU-1785. I use the K&N Pre-Charger, # RE-0810PK for dusty/sandy trails.

I'm still looking for an effective air dam to keep out hot, dirty air. Still, I guess I prefer a cone to the flat panel K&N filter. Would be nice if someone (ARB) made a snorkel meant for 98 & up Rodeos and Amigos/RS's...


'02 Rodeo Sport, 3.2l V6, 4WD Hardtop, 3" lift, Rancho 9000X's, StinkyFab front & rear tube bumpers, K&N Air Filter, PowerVault muffler, 285/75/16 Nitto ATs w/ steel rims, more soon...







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5997 MB (Peak: 0.6548 MB) Data Comp: Off Server Time: 2026-06-10 12:05:05 UTC
Valid HTML 5 and Valid CSS