two piece driveshaft

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

two piece driveshaft #816744 06/05/07 05:33 AM

Joined: Jan 2007

Posts: 16

Grass Valley Ca.

kc85

Need a Spot

i have an 85 ext cab with two piece driveshaft with no cv joint just three ujoints.does the first shaft come straight out of transfercase to csb then down to rear end or are both shafts suppost to be straight.i know angles are wrong just don't know what way to go

Entire Thread
Subject	Posted By	Posted
two piece driveshaft	kc85	06/05/07 05:33 AM
Re: two piece driveshaft	4Crawler	06/05/07 03:10 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.582s Queries: 15 (3.580s) Memory: 0.5938 MB (Peak: 0.6268 MB) Data Comp: Off Server Time: 2026-06-21 20:26:02 UTC
Valid HTML 5 and Valid CSS