Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: Wiring harness question (extra plug?) [Re: OFFRD88] #817422 06/11/07 05:31 AM
Joined: Oct 2002
Posts: 15,887
kewlynx Offline
Toyota & Classifieds Moderator
*****
If that's a 22RE in the '88, the FSM for the 93 in the FSM's sticky'd here should be pretty close for ya.

Follow our FAQ above to format your picture sizes. <img src="/forums/images/graemlins/kewl.gif" alt="" />


http://www.walkablecommunities.org/

Democracy is two wolves and a lamb voting on what to have for dinner. Liberty is a well-armed lamb contesting the vote.

**ubi apis- ibi salus**
Re: Wiring harness question (extra plug?) [Re: kewlynx] #817423 06/11/07 05:56 AM
Joined: Jun 2007
Posts: 28
OFFRD88 Offline OP
Getting the Wheeling Fever
Quote
If that's a 22RE in the '88, the FSM for the 93 in the FSM's sticky'd here should be pretty close for ya.

Follow our FAQ above to format your picture sizes. <img src="/forums/images/graemlins/kewl.gif" alt="" />


Thanks, looks like I'm going to need an actuator. Anyone happen to have a pic which would show what this looks like installed?

On formatting picture size- I only saw sizing guidelines for the graphic in a signature. Not sure what you're referring to?

Thanks again for the help,


Dave A.
88 P/U lots of mods
95 4Runner on 33's with a Detroit
Couple of mountain bike's rolling on 26's.
Re: Wiring harness question (extra plug?) [Re: OFFRD88] #817424 06/11/07 07:30 AM
Joined: May 2006
Posts: 457
D
Davepet Offline
Mudrunner
I've re-done my picture. Both hoses connect to the device circled in yellow on the manifold. The port farther from the body has yellow arrows & the closer one has red.

I'll try to get a better picture tomorrow.

Dave[Linked Image]

Re: Wiring harness question (extra plug?) [Re: OFFRD88] #817425 06/11/07 02:10 PM
Joined: Jan 2000
Posts: 12,153
4Crawler Offline
Web Wheeler
*****
Quote
I'll have to upload some pics to my site and link them.

I confirmed that the plug is the A/C idle up switch, checked the wiring schematics and the colors match.

What I can't find is any diagram for the vacuum hose routing <img src="/forums/images/graemlins/confused.gif" alt="" />. Anyone have a diagram or an '88 with A/C? I do have a plug in the side of the intake plenum, is there another device which goes there in an A/C equipped vehicle? My wife's '95 is too different to use as an example.


Here is how my '85 is set up:
http://www.4crawler.com/4x4/CheapTricks/22RE_Engine_Pix/13.html

One hose to the intake manifold and the other the the idle up valve:
[Linked Image]

Re: Wiring harness question (extra plug?) [Re: OFFRD88] #817426 06/11/07 03:10 PM
Joined: Jun 2007
Posts: 28
OFFRD88 Offline OP
Getting the Wheeling Fever
Thanks guys. On my wife's '95 that port and a very similar device is hooked up to the power steering, I'd assume to idle up when turning at idle speed?

I assume the 3rd line ties into the intake after the MAF?

Thanks again for the help,


Dave A.
88 P/U lots of mods
95 4Runner on 33's with a Detroit
Couple of mountain bike's rolling on 26's.
Re: Wiring harness question (extra plug?) [Re: OFFRD88] #817427 06/12/07 03:38 AM
Joined: May 2006
Posts: 457
D
Davepet Offline
Mudrunner
I don't know if it changed since 85, but mine is an 87 & both hoses go to the idle up valve. The second image shows the power steering hookup.

[Linked Image]U
[Linked Image]

This is the underhood sticker from the 87, it's not real clear, but pretty sure the dotted AC lines are the ones we are dealing with.
[Linked Image]

Re: Wiring harness question (extra plug?) [Re: OFFRD88] #817428 06/12/07 04:34 AM
Joined: Jun 2007
Posts: 28
OFFRD88 Offline OP
Getting the Wheeling Fever
Thanks for the pics, that's very helpful. So if I'm seeing this right, one of the power steering lines and one of the A/C idle up lines each run to the actuator. Right now my power steering runs from right before the throttle plate and returns on the manifold with no other devices involved.

Anyone have a spare they want too part with (actuator)? Dealer probably wants $300 for one.

Thanks a lot for those pics.


Dave A.
88 P/U lots of mods
95 4Runner on 33's with a Detroit
Couple of mountain bike's rolling on 26's.
Re: Wiring harness question (extra plug?) [Re: OFFRD88] #817429 06/12/07 07:49 AM
Joined: May 2006
Posts: 457
D
Davepet Offline
Mudrunner
I color coded the hoses on this pic to make it easier to see:\
Yellow goes from the Plenum to power steering sender
Green from PS sender to actuator
Red from actuator to just in front of throttle plate
Purple & Blue both go directly between the VSV & the actuator. The pic seems pretty clear on those.

Dave


[Linked Image]

Page 2 of 2 1 2

Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.008s Queries: 15 (0.005s) Memory: 0.6336 MB (Peak: 0.7342 MB) Data Comp: Off Server Time: 2026-06-10 01:40:20 UTC
Valid HTML 5 and Valid CSS