Rim/Tyre Question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rim/Tyre Question [Re: rustylux] #817843 06/11/07 01:11 AM

Joined: Apr 2002

Posts: 3,568

Grass Valley, CA

Snowtoy

Roll Me Over

You can buy some 1/4" spacers if that would be enough. They slide over the lug studs and are reatively cheep compared to the bolt on wheel spacers.

More than tread lightly. Leave it like you were never there, nor anyone else.
'90 X-cab 4.88's 33 BFG AT's, rr ARB, Headers, Ignition upgrade, cold air induction.
'91 X-cab 5.29's 315's BFG MT's, rr ARB, custom bumper and flatbed

Entire Thread
Subject	Posted By	Posted
Rim/Tyre Question	rustylux	06/10/07 01:37 PM
Re: Rim/Tyre Question	4Crawler	06/10/07 10:01 PM
Re: Rim/Tyre Question	Snowtoy	06/11/07 01:11 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.502s Queries: 16 (3.500s) Memory: 0.5960 MB (Peak: 0.6290 MB) Data Comp: Off Server Time: 2026-06-05 08:54:14 UTC
Valid HTML 5 and Valid CSS