knock-knock

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

knock-knock #818158 06/12/07 04:22 AM

Joined: Nov 2006

Posts: 16

Thomson,Ga

84_rust_bucket Offline

Need a Spot

I'm in the process of placing my 84 22r in an 86 4runner w/efi,the intake bolts up fine the only problem that I'm running into is the knock sensor.All of the unused holes are too small,I'm sure I could rig something to make it fit but does it have to be hooked up to run.I plan to rebuild the 86 22re but I have the 84 22r with less than 20k on it just sitting around.

Entire Thread
Subject	Posted By	Posted
knock-knock	84_rust_bucket	06/12/07 04:22 AM
Re: knock-knock	4Crawler	06/12/07 05:14 AM
Re: knock-knock	84_rust_bucket	06/12/07 11:52 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.493s Queries: 15 (3.491s) Memory: 0.5960 MB (Peak: 0.6290 MB) Data Comp: Off Server Time: 2026-06-02 12:36:28 UTC
Valid HTML 5 and Valid CSS