When I did my body lift I didn't use a high lift. I didn't want to bend anything.

I used two standard lift jacks like the Sportage came with positioned under each side just inside the frame rails and about at the mid point. I placed 2 12 inch long 4x4 blocks under the jack side by side to give it a wider base. Then I put another 4x4 block on top of the jack to spread out the weight of the body so it wouldn't bend the floor.

This setup worked great and I could use either jack to tip or tilt the vehicle to get the bolts to line up.

Logansportage <img src="/forums/images/graemlins/patriot.gif" alt="" />