Cylinder head application/ exchange

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Cylinder head application/ exchange [Re: Airdale73013] #818448 06/13/07 08:41 PM

Joined: Mar 2002

Posts: 4,497

Highland, NY

Axe Man

Kia Moderator Emeritus

I would have to agree with Airdale that it cannot easily be done. I believe some of the castings in the block on the front are different. Also the water pump uses a different timing gear.

1998 Sportage - Gone.
2004 Honda Civic Coupe.
2007 Suzuki Grand Vitara - She got it.

Entire Thread
Subject	Posted By	Posted
Cylinder head application/ exchange	edselsouth1	06/13/07 01:29 AM
Re: Cylinder head application/ exchange	Airdale73013	06/13/07 12:58 PM
Re: Cylinder head application/ exchange	Axe Man	06/13/07 08:41 PM
Re: Cylinder head application/ exchange	edselsouth1	06/14/07 02:41 AM
Re: Cylinder head application/ exchange	bombardj1	06/14/07 12:22 PM
Re: Cylinder head application/ exchange	edselsouth1	06/16/07 05:04 AM

Moderated by 4x4Wire, Axe Man, DamKia

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.560s Queries: 16 (3.558s) Memory: 0.6029 MB (Peak: 0.6359 MB) Data Comp: Off Server Time: 2026-06-12 09:51:00 UTC
Valid HTML 5 and Valid CSS