Cylinder head application/ exchange

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Cylinder head application/ exchange [Re: Axe Man] #818449 06/14/07 02:41 AM

Joined: Jun 2007

Posts: 16

Huntsville, Ala., USA

edselsouth1 Offline

Need a Spot

Airdale, AxeMan, Thanks for the information. It's possible that the problem may be only a head gasket. I have not removed the head as of yet, just trying to line up a head in the event I may need one. Anyone with a useable SOHC , 2.0 head, let me know. Thanks, David

Entire Thread
Subject	Posted By	Posted
Cylinder head application/ exchange	edselsouth1	06/13/07 01:29 AM
Re: Cylinder head application/ exchange	Airdale73013	06/13/07 12:58 PM
Re: Cylinder head application/ exchange	Axe Man	06/13/07 08:41 PM
Re: Cylinder head application/ exchange	edselsouth1	06/14/07 02:41 AM
Re: Cylinder head application/ exchange	bombardj1	06/14/07 12:22 PM
Re: Cylinder head application/ exchange	edselsouth1	06/16/07 05:04 AM

Moderated by 4x4Wire, Axe Man, DamKia

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.503s Queries: 16 (3.500s) Memory: 0.6015 MB (Peak: 0.6344 MB) Data Comp: Off Server Time: 2026-06-11 20:22:10 UTC
Valid HTML 5 and Valid CSS