Steve's got it nailed. I'm going to wind up with a 91 Amigo, a Camaro 3.8L motor(200ft/lb of torque from about 1500rpm on up), and a solid front axle moved forward 3-6" (Not sure how much, as that's a future project). The stock 91 and the 2000 Amigo specs, are indeed, only there for comparison purposes.

It edited the original post using the 'code' command (Thanks Wayne) so the comparison chart is more ledgable.

Thanks for the input so far...

Chris Enos (Chino, CA)

'91 Isuzu Amigo "Rover" (Camaro 3800 swap in progress / 2.25" exhaust)
....(SOA / Custom rear bumper / CB / HAM)