|
|
|
|
 Locking hubs
#819914
06/19/07 03:27 PM
|
Joined: Jan 2007
Posts: 46
OP
Getting the Wheeling Fever
|
Whats the spline count difference between the locking hubs on an IFS versus solid axle locking hubs. Could the hub guts be swaped out from either or, to make them work if they are different?
|
|
|
Re: Locking hubs
[Re: scotia]
#819915
06/19/07 04:06 PM
|
Joined: Jan 2000
Posts: 12,153
Web Wheeler
|
27 vs. 30 as I recall. Some of the internal parts are interchangeble from what I have heard.
|
|
|
Re: Locking hubs
[Re: 4Crawler]
#819916
06/19/07 10:21 PM
|
Joined: Jan 2007
Posts: 46
OP
Getting the Wheeling Fever
|
So the 30 are on the solid axle, correct? And has anyone swapped the hub guts from a 27 and make it a 30 or vice versa?
|
|
|
Re: Locking hubs
[Re: scotia]
#819917
06/19/07 11:09 PM
|
Joined: Jan 2000
Posts: 12,153
Web Wheeler
|
Correct, 30 on the solid axle hubs. There was a thread on the Pirate forum in the last year about parts swapping between hubs.
|
|
|
Re: Locking hubs
[Re: 4Crawler]
#819918
06/20/07 01:08 AM
|
Joined: Nov 2005
Posts: 40
Getting the Wheeling Fever
|
some of the guts may be interchangeable, but the hub body is different, more of a recess for the ifs to clear the spindle nuts than on the sa hubs. sa hubs won't fit on ifs...
|
|
|
Re: Locking hubs
[Re: scotia]
#819919
06/20/07 02:40 AM
|
Joined: Apr 2007
Posts: 51
Getting the Wheeling Fever
|
while doing a recent knuckle rebuild on my 83 sfa, i counted 27 spline.
|
|
|
Re: Locking hubs
[Re: flyinhawaiian]
#819920
06/20/07 02:48 AM
|
Joined: Jan 2007
Posts: 46
OP
Getting the Wheeling Fever
|
So if I took the IFS hubs and replaced the 27 spline locking collar and replaced it with an after market 30 spline collar , they would not fit on a solid axle, correct?
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 1.120s Queries: 15 (0.004s) Memory: 0.6172 MB (Peak: 0.6901 MB) Data Comp: Off Server Time: 2026-06-07 08:10:23 UTCValid HTML 5 and Valid CSS 
