Quote
If your valves were bent, is there also a possibility that the valve guides are worn from three point contact of a curved valve stem sliding through a straight tube?


Quote
Kap, start around page 9; that'll give you some idea of the lapping process.

Head rebuild

This is out of the FSM that's sticky'd here btw.


Thanks guys, I know what I'm doing now... I don't think I'll have much trouble since the head is less than 2 years / 20k miles old. Plus it's already been magnafluxed and cleaned.

93' Toy xCab
bobbed > 22rEB > w56 > stock duals > SAS > 4.88's > 37's