Can the turning diameter on the '07 tacoma's be reduced?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Can the turning diameter on the '07 tacoma's be reduced? #822022 06/30/07 01:20 AM

Joined: Feb 2007

Posts: 12

Climber66

Need a Spot

The new Tacoma double cabs have a 40ft turning radius. The double cab long bed, even a 44ft radius. I know it is because of the increased distance between front and rear wheels, but is there a way to increase the steering angle range? Or are the wheels already close to hitting the axles at full stop?

Climber

Entire Thread
Subject	Posted By	Posted
Can the turning diameter on the '07 tacoma's be reduced?	Climber66	06/30/07 01:20 AM
Re: Can the turning diameter on the '07 tacoma's be reduced?	azrain	06/30/07 05:11 PM
Re: Can the turning diameter on the '07 tacoma's be reduced?	BIGBURLYNAKEDMAN	07/02/07 05:42 AM
Re: Can the turning diameter on the '07 tacoma's be reduced?	RichinROA	07/02/07 02:51 PM
Re: Can the turning diameter on the '07 tacoma's be reduced?	Climber66	07/06/07 01:31 AM

Moderated by 4x4Wire, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.549s Queries: 15 (3.547s) Memory: 0.5990 MB (Peak: 0.6320 MB) Data Comp: Off Server Time: 2026-06-16 04:06:49 UTC
Valid HTML 5 and Valid CSS