how to remove crankshaft pulley

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

how to remove crankshaft pulley #822141 06/30/07 09:12 PM

Joined: Aug 2006

Posts: 31

da_z_man

Getting the Wheeling Fever

i'm changing my timming belt i need to remove crankshaft pulley i'm trying every thing but the nut wont move

99 rodeo 2wd
3"body lift
3" suspension
Aussie Locker
PROCOMP ES-9000

Entire Thread
Subject	Posted By	Posted
how to remove crankshaft pulley	da_z_man	06/30/07 09:12 PM
Re: how to remove crankshaft pulley	Ed Mc	06/30/07 10:37 PM
Re: how to remove crankshaft pulley	boritz	07/01/07 06:46 AM
Re: how to remove crankshaft pulley	Jim_Paget	07/01/07 12:47 PM
Re: how to remove crankshaft pulley	acy76	07/02/07 05:14 AM
Re: how to remove crankshaft pulley	TatoHead	07/02/07 05:49 PM
Re: how to remove crankshaft pulley	hellbound	07/03/07 12:24 PM
Re: how to remove crankshaft pulley	NATO308	07/05/07 07:19 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.541s Queries: 15 (3.538s) Memory: 0.6071 MB (Peak: 0.6401 MB) Data Comp: Off Server Time: 2026-06-15 17:56:19 UTC
Valid HTML 5 and Valid CSS