Trying to attach the torque rod.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Trying to attach the torque rod. [Re: Nix_Toy] #822308 07/01/07 03:51 PM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

Might be the axle rotated or moved forward with the lift, shortening the hole spacing. But some ideas to install at to raise the front end up to get the holes to line up. Or use a come-a-long to winch the axle bracket back to line the holes up. I had to do this on my '85, only winching it forward until I got an adjustable length torque rod.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
Trying to attach the torque rod.	Nix_Toy	07/01/07 02:36 PM
Re: Trying to attach the torque rod.	4Crawler	07/01/07 03:51 PM
Re: Trying to attach the torque rod.	OOP'S	07/01/07 04:25 PM
Re: Trying to attach the torque rod.	whitetoy	07/01/07 04:37 PM
Re: Trying to attach the torque rod.	OOP'S	07/01/07 05:18 PM
Re: Trying to attach the torque rod.	whitetoy	07/02/07 05:31 AM
Re: Trying to attach the torque rod.	sirus027	07/02/07 02:34 PM
Re: Trying to attach the torque rod.	salvo	07/02/07 04:34 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.896s Queries: 16 (3.894s) Memory: 0.6071 MB (Peak: 0.6401 MB) Data Comp: Off Server Time: 2026-06-05 05:24:13 UTC
Valid HTML 5 and Valid CSS