Trying to attach the torque rod.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Trying to attach the torque rod. [Re: Nix_Toy] #822310 07/01/07 04:37 PM

Joined: Feb 2001

Posts: 402

Folsom, CA

whitetoy

Mudrunner

Fab up your own adjustable-length t-rod.
You might need an after-market extender-bracket as well. Thats what I did.
I used a heim-joint, a coupler with the same thread,
and a die. Then cut your stock rod, thread it, and assemble.
Photo of rod (ignore the grease)

Last edited by whitetoy; 07/01/07 04:39 PM.

Rick
1984 4Runner

Entire Thread
Subject	Posted By	Posted
Trying to attach the torque rod.	Nix_Toy	07/01/07 02:36 PM
Re: Trying to attach the torque rod.	4Crawler	07/01/07 03:51 PM
Re: Trying to attach the torque rod.	OOP'S	07/01/07 04:25 PM
Re: Trying to attach the torque rod.	whitetoy	07/01/07 04:37 PM
Re: Trying to attach the torque rod.	OOP'S	07/01/07 05:18 PM
Re: Trying to attach the torque rod.	whitetoy	07/02/07 05:31 AM
Re: Trying to attach the torque rod.	sirus027	07/02/07 02:34 PM
Re: Trying to attach the torque rod.	salvo	07/02/07 04:34 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.473s Queries: 16 (3.471s) Memory: 0.6074 MB (Peak: 0.6404 MB) Data Comp: Off Server Time: 2026-06-06 13:43:52 UTC
Valid HTML 5 and Valid CSS