Quote
Seems I need a 4" torque wrend (T-40) to tighten the bolts on the windshield when mounting the movers, and a t-27 torque wrench to remove the OEM mirrors from the doors. Had neither in my inventory, and the local hardware store did not have the 4" torque wrench in stock


Not to be nit picky, but just to avoid confusion for those who may not know. What you have (T-27, and T-40) are Torx fasteners, which were originally designed as a screw type fastener to resist the driver head popping out of the screw like with a Phillips fastener. Unfortunately we have to deal with Torx fasteners all over our Jeeps. A Torque wrench as you refer to is MUCH different than a Torx wrench, or Torx driver.

On that note, you can go to any Sears and get a 3/8 drive Craftsman set that will cover your Jeep, but they arenÆt cheap. I just picked up a 9 piece Performance Tool set at Summit when I was driving through Ohio that covers T-10 to T-50 for $9.95.

Sean