Quote
Easy to say, hard to do correctly I guess. My Torx connectors (3 of the 4) are now stripped. I pounded as best as I could to cement the torx into the connector, but to no avail. At the first turn of the socket wrench, it spins and disengages stripping the connector. I've already purchased replacement connectors, but how do I get them out?


You stripped them out using a hammer impact driver like this?
http://www.sears.com/sr/javasr/prod...&vertical=TOOL&ihtoken=1

I am a little suprised, but like Jim said, if you didn't have the Torx bit fully seated in the screw/ bolt, its not hard to do. Allen scres/ bolts are just as big of a pain.