Bolt for the roll bar?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Bolt for the roll bar? [Re: rustylux] #822998 07/05/07 12:24 AM

Joined: Jan 2007

Posts: 241

Aurora, Ontario

canuck

Wheeler

Won't be a 7/16 UNF as all bolts on a Toyota are metric. Dont know metric size but the thread will look similar to a UNF. It will probably be a 8mm. Everybody confuses metric bolts with UNF (national fine).

Keep the Shiney Side up. Support our troops.

Entire Thread
Subject	Posted By	Posted
Bolt for the roll bar?	WolvesCross	07/04/07 05:31 AM
Re: Bolt for the roll bar?	rustylux	07/04/07 07:55 AM
Re: Bolt for the roll bar?	canuck	07/05/07 12:24 AM
Re: Bolt for the roll bar?	stock87	07/05/07 02:54 AM
Re: Bolt for the roll bar?	RatLabGuy	07/05/07 04:14 AM
Re: Bolt for the roll bar?	fourwd1	07/05/07 03:32 PM
Re: Bolt for the roll bar?	MAC	07/05/07 06:00 PM
Re: Bolt for the roll bar?	cam01	07/10/07 08:26 PM
Re: Bolt for the roll bar?	jmsdad	07/05/07 09:07 PM
Re: Bolt for the roll bar?	rustylux	07/05/07 10:34 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.644s Queries: 16 (3.642s) Memory: 0.6100 MB (Peak: 0.6430 MB) Data Comp: Off Server Time: 2026-05-26 02:04:38 UTC
Valid HTML 5 and Valid CSS