1 Freakin Hour!!! <img src="/forums/images/graemlins/scared.gif" alt="" /> No Way! Did you have 6 hands cause this task took me about 6! It wasnt hard to install, just a long process of getting everything out of the way and I had to move other aftermarket wiring I had around the air box. It was a little hard at first cause of where the 102mm hole had to go, right on the curve of the fender so the drill bit touched and the teeth of the hole saw was very close, so you have to start off fast and let it sink in slowly so it cuts evenly.

That last bolt you were talking about behind the antenna was a lil b!tch to get to! Everything else went well. I'll have some pics of when I'm done with all my other projects too.

BTW, is there anything else inside the drivers-side fender. Might be a good place for a compressor now that I think about it <img src="/forums/images/graemlins/notooth.gif" alt="" />

ALSO, is there a drain for water to run through. I just thought about it, but if there is some heavy rain, its defintielly going inside, but where does it drain. I didnt have time to check it out bofore the install. If there isnt, is drilling a small hole reccomended?

Angelo