Tool of champions! You like, huh?!?<img src="/forums/images/graemlins/kewl.gif" alt="" />

I just undid the bolts holding the headlight washer tank instead. It moved out of the way pretty good. The first inital hole was the hardest to do. I was a lil nervous about it <img src="/forums/images/graemlins/scared.gif" alt="" />


Wrapped sand paper around the screw driver and sanded the edges down smooth, then spray painted it inside and out

Did you have problems pushing the tube into the adapter? It wouldnt fit right cause of the curve in the adapter, so it started splitting from here and I cut it a lil further so it would fit snug, then used the ring it came with to tighten it up. Worked great just a lil tricky. <img src="/forums/images/graemlins/angry.gif" alt="" />


Finished results <img src="/forums/images/graemlins/kewl.gif" alt="" /> I like the design, hugs the fender very nicely. Everything worked out great with some minor adjustments. If anyone else does it, make sure to put silicon around the holes in the pillar and the rest of the holes if you feel like it as I did too.