bent relay rod?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: bent relay rod? [Re: fishy97t100] #823607 07/07/07 06:03 AM

Joined: Feb 2000

Posts: 4,160

Auburn, NorCal

ErikB

Toyota Moderator

Center link looks bent to me and looks like its causing the TRE to rub on the frame. I would check your idler arm too since that is usually the weakest link.
The center link should be straighter than yours looks.

[Linked Image]

'97 4Runner, '06 F350, '86 4Runner, '05 WR450
http://home.4x4wire.com/erik

Entire Thread
Subject	Posted By	Posted
bent relay rod?	fishy97t100	07/07/07 04:18 AM
Re: bent relay rod?	ErikB	07/07/07 06:03 AM
Re: bent relay rod?	Jake97T	07/07/07 01:51 PM
Re: bent relay rod?	adam	07/10/07 08:35 AM
Re: bent relay rod?	fishy97t100	08/22/07 03:02 PM
Re: bent relay rod?	kustomyoung	08/22/07 05:11 PM
loud squeal	fishy97t100	01/28/08 09:25 PM
Re: loud squeal	fishy97t100	02/19/08 06:57 AM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.736s Queries: 16 (3.733s) Memory: 0.6082 MB (Peak: 0.6412 MB) Data Comp: Off Server Time: 2026-10-28 04:27:30 UTC
Valid HTML 5 and Valid CSS