timing cover repair sleeve tool?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: timing cover repair sleeve tool? [Re: haulie] #824141 07/10/07 06:54 PM

Joined: Sep 2004

Posts: 227

OREGON

SALMONHEAD Offline

Wheeler

There is a deeper one out there as I just got done with my TC job and the old sleeve had a lip and seated flush with the hub side of the harmonic balancer. However, I could not find a deep one to put back on. I went with the standard one and all is good so far (day 1). If you find the deep one please let us know where you got it. I also found new HB on e-bay for about $70 as an alternative.

Thanks

84 4RUNNER,22R,HEDMAN,WEBER 32/36,Davis Unified Ignition,33" BFG

Entire Thread
Subject	Posted By	Posted
timing cover repair sleeve tool?	haulie	07/10/07 02:53 PM
Re: timing cover repair sleeve tool?	SALMONHEAD	07/10/07 06:54 PM
Re: timing cover repair sleeve tool?	haulie	07/11/07 02:06 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.673s Queries: 16 (3.671s) Memory: 0.5966 MB (Peak: 0.6296 MB) Data Comp: Off Server Time: 2026-06-22 08:35:02 UTC
Valid HTML 5 and Valid CSS