Pulling Engine q

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Pulling Engine q [Re: kewlynx] #824251 07/11/07 04:47 AM

Joined: Oct 2003

Posts: 108

Bellingham, WA

DanSweet

Wheeler

Ok, I got it. The dowel on the drivers side was just really stuck. Not like I've ever seen before. I just didn't want to break anything, but I got it. Thanks,

Dan

94' 22re Ex Cab 4x4...pretty much stock, 2" 4 Crawler body lift and 32 x 11.50 bfg mud terrains.

Entire Thread
Subject	Posted By	Posted
Pulling Engine q	DanSweet	07/11/07 01:47 AM
Re: Pulling Engine q	kewlynx	07/11/07 02:03 AM
Re: Pulling Engine q	DanSweet	07/11/07 04:47 AM
Re: Pulling Engine q	toyotaguy55	07/11/07 05:22 AM
Re: Pulling Engine q	Scerb	07/11/07 02:45 PM
Re: Pulling Engine q	TinyTruck	07/12/07 05:01 AM
Re: Pulling Engine q	engnbldr	07/12/07 05:33 AM
Re: Pulling Engine q	Cholltero	07/12/07 02:57 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.543s Queries: 16 (3.541s) Memory: 0.6070 MB (Peak: 0.6400 MB) Data Comp: Off Server Time: 2026-06-18 07:20:30 UTC
Valid HTML 5 and Valid CSS