Adjusting 2.6L lifters/valves

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Adjusting 2.6L lifters/valves #824342 07/11/07 04:16 PM

Joined: Mar 2006

Posts: 227

Calgary, AB, Canada

jerzboy

Wheeler

Does anyone know or have the proper procedure for adjusting the lifters/valves on a non-jet solid lifter 2.6L head (Caravan)

My valvetrain clacks worse than phils diesel!

'09 Acura TSX Tech Package
'05 Blazer (Company hauler)
Retired '88 Bada$$ edition Raider (now owned by shadowgear)

Entire Thread
Subject	Posted By	Posted
Adjusting 2.6L lifters/valves	jerzboy	07/11/07 04:16 PM
Re: Adjusting 2.6L lifters/valves	powerRam50	07/11/07 04:53 PM
Re: Adjusting 2.6L lifters/valves	fasteddy	07/11/07 06:44 PM
Re: Adjusting 2.6L lifters/valves	torquemonster	07/11/07 07:03 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.327s Queries: 15 (3.487s) Memory: 0.5990 MB (Peak: 0.6320 MB) Data Comp: Off Server Time: 2026-06-04 03:06:49 UTC
Valid HTML 5 and Valid CSS