Would 3.0L Downey headers fit on a 3.4L?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Would 3.0L Downey headers fit on a 3.4L? #824362 07/11/07 07:08 PM

Joined: Feb 2007

Posts: 12

Climber66

Need a Spot

Currently have a '91 4Runner with the dreaded 3.0L and am thinking about the swap to the 3.4L. I have Downey headers on my 3.0L and was wondering if these would fit (with only slight modifications) on the 3.4L.

Climber

Entire Thread
Subject	Posted By	Posted
Would 3.0L Downey headers fit on a 3.4L?	Climber66	07/11/07 07:08 PM
Re: Would 3.0L Downey headers fit on a 3.4L?	Greg_Canada	07/12/07 12:44 AM
Re: Would 3.0L Downey headers fit on a 3.4L?	Kutter	07/12/07 06:27 PM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.546s Queries: 15 (3.544s) Memory: 0.5962 MB (Peak: 0.6292 MB) Data Comp: Off Server Time: 2026-06-04 16:03:14 UTC
Valid HTML 5 and Valid CSS