Would 3.0L Downey headers fit on a 3.4L?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Would 3.0L Downey headers fit on a 3.4L? [Re: Greg_Canada] #824364 07/12/07 06:27 PM

Joined: Aug 2005

Posts: 229

Kansas

Kutter

Wheeler

Yes, for sure the swap is a good idea. 3.0 headers will not fit 3.4.

See link to 3.4 swap below.

http://www.4x4wire.com/forums/showf...mp;amp;sb=5&o=14&fpart=1

In my 3.4 swap I used factory manifolds. I have absolutely no heat issues like I expereinced with my downey 3.0 headers.

1995 4Runner Limited V6 3.4 Liter 5 Speed 4x4
1995 4Runner V6 Auto 2WD

Entire Thread
Subject	Posted By	Posted
Would 3.0L Downey headers fit on a 3.4L?	Climber66	07/11/07 07:08 PM
Re: Would 3.0L Downey headers fit on a 3.4L?	Greg_Canada	07/12/07 12:44 AM
Re: Would 3.0L Downey headers fit on a 3.4L?	Kutter	07/12/07 06:27 PM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.602s Queries: 16 (3.600s) Memory: 0.5972 MB (Peak: 0.6301 MB) Data Comp: Off Server Time: 2026-05-31 09:20:41 UTC
Valid HTML 5 and Valid CSS