Swaping out shifter knob

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Swaping out shifter knob [Re: bradford_johnson] #824377 07/11/07 11:02 PM

Joined: Jan 2007

Posts: 534

Wilmington, NC

DBL_DTY97TJ Offline

Rock Warrior

Yours should have the cap with the shift pattern which will pry out. There is a nut underneath that has to come off before the nob will unscrew.

97tj, Shaved Ford 9 rear, 4:10's, New 35x12.5 BFG KM2's to test!, Warn x8000i, ARB's, Quick Disco's, Hand Throttle, & it's my DD.

Entire Thread
Subject	Posted By	Posted
Swaping out shifter knob	bradford_johnson	07/11/07 09:06 PM
Re: Swaping out shifter knob	BigJim	07/11/07 09:20 PM
Re: Swaping out shifter knob	DBL_DTY97TJ	07/11/07 11:02 PM
Re: Swaping out shifter knob	bradford_johnson	07/11/07 11:10 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.515s Queries: 16 (3.512s) Memory: 0.5977 MB (Peak: 0.6307 MB) Data Comp: Off Server Time: 2026-06-23 07:38:04 UTC
Valid HTML 5 and Valid CSS